JBL LSR6312SP - Manual (Page 2)

2
Important Safety Instructions
The IEC fuse symbol pictured at the left represents an approved, user replaceable fuse. When replacing a
fuse, make sure to replace with only the correct type and fuse rating.
1. Read lnstructions - Before operating your new JBL product, please read all safety and operating
instructions.
2. Keep these instructions - For future reference and troubleshooting purposes, retain these instructions.
3. Heed all warnings - All warnings in this user manual should be followed.
4. Follow Instructions - By following instructions presented in this guide, you should be able to quickly
enjoy an accurate and safe monitoring system.
5. Water and Moisture - Do not use this apparatus near water or plumbing fixtures.
6. Cleaning - Clean with a lint-free cloth - Do not use any solvent based cleaners on the finish. A slightly
damp cloth can also be used on the enclosure surfaces and woofer surrounds.
7. Ventilation - Do not block any ventilation opening, including the Linear Dynamics Aperture Port on the
monitor systems. Install these products in accordance with manufacturers instructions. Do not install near
any heat sources such as radiators, heat registers, stoves or other apparatus that produce heat.
8. Grounding and Power Cords - The power cord supplied with your powered product has a 3-pin plug.
Do not cut off or damage the grounding pin. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet. Dress the power cords so that they will not be inadvertently
walked on or pinched, particularly at plugs, convenience receptacles and the points where they exit the ap-
paratus.
All powered products are fitted with a detachable power cord (supplied) which connects to the chassis AC
connector. The power cord has an IEC female connector on one end and a male mains connector on the other
end. This cord is supplied specifically to accommodate the different safety and electrical code requirements
of individual countries. If you are traveling abroad with your system, test the power mains and be aware of
any specific voltage requirements before operating your system.
9. Options - Only use attachments or accessories specified by the manufacturer.
10. Non-use Periods - Unplug this apparatus during lightning storms or when it will be unused for long
periods of time.
11. Servicing - Refer all servicing to qualified service personnel. Servicing is required when the apparatus
does not work, or has been damaged in any way, including: damage to power cord or plug, water or other
liquid damage to the electronics, or damage due to falling or dropping.
12. Wall or Ceiling Mounting - The appliance should be mounted on a wall or ceiling only as recommend-
ed by the manufacturer. [See Pages 6 – 7]
13. Carts and Stands - The appliance should be used only with carts or stands that are sturdy and well
balanced. All appliance and cart combinations should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.