GE 97859 GE Wired Scroll Mouse for PCs User Manual

Page 3

CONNECTING YOUR MOUSE

CAUTION: Always turn off your computer before connecting or disconnecting
your mouse. To connect your mouse, plug the PS/2 connector into
your computer’s PS/2 port.

INSTALLING YOUR SCROLL WHEEL SOFTWARE

In order to take full advantage of your mouse, you must install the enclosed
software. While your input device will work as a basic mouse once it is plugged
in, the software must be loaded to use the programmable features.
To install from Windows

95, 98, ME, NT, 2000 or XP:

1. Insert the Mouse SETUP DISK into your floppy disk drive.
2. Double-click on MY COMPUTER then double-click on A DRIVE or which ever
letter is assigned as your Floppy Drive. Double-click on SET UP and follow the
on screen instructions.
3. Restart Computer.
NOTE: If you do not restart your computer, the software will not operate.
5. Once restarted, the mouse icon should appear in the Windows® system
tray in the lower right corner of your screen near the clock. Double click the
icon to bring up your mouse control panel.

CUSTOMIZING YOUR MOUSE

From the mouse control panel, you can customize your mouse to meet your indi-
vidual needs! Just click on the appropriate tab to adjust settings:

PS/2

Mouse Port:

97859.qxp 8/27/03 8:43 AM Page 3