Jura Capresso IMPRESSA S9/S7 User Manual

Page 15

Ⅲ

NORMAL (example)
–

ⅥⅥⅥ _ _ _ +

Ⅲ Now turn the Rotary Switch (4) until the required amount of

powder is set.

Ⅲ

STRONG (example)
–

ⅥⅥⅥⅥ _ _ +

Ⅲ Confirm the selected setting by pressing the Rotary Switch (4).
Ⅲ

POWDER
QUANTITY

Ⅲ Now turn the Rotary Switch (4) until the following message is

displayed:

Ⅲ

EXIT

Ⅲ Now press the Rotary Switch (4) to leave the programming

mode.

Ⅲ

SELECT PRODUCT

13.5 Setting the amount of water for coffee,

espresso and coffee à la carte

The system’s basic settings include pre-defined amounts of water
(coffee 130 ml, espresso 60 ml, 2 coffees 260 ml, coffee à la carte
145 ml). However, these can be modified as required.

Ⅲ

SELECT PRODUCT

Ⅲ Open the programming door (3). Press the Rotary Switch (4) un-

til you hear an acoustic signal.

Ⅲ

FILTER
NO or YES

Ⅲ Turn the Rotary Switch (4) until the following message is dis-

played:

Ⅲ

WATER
QUANTITY

Ⅲ Press the Rotary Switch (4) to activate the program item.

Ⅲ

SELECT
PRODUCT

Ⅲ Press a product key of your choice.
Ⅲ

1 ESPRESSO (example)
60 ML

Ⅲ Turn the Rotary Switch (4) to adjust the amount of water and

then confirm your setting by pressing the Rotary Switch (4).

Ⅲ

WATER
QUANTITY

Ⅲ Turn the Rotary Switch (4) until the following message is dis-

played:

Ⅲ

EXIT

Ⅲ Press the Rotary Switch (4) to leave the programming mode.
Ⅲ

SELECT PRODUCT

13.6 Programming the temperature for coffee,

espresso and coffee à la carte

You can adjust the temperature for each type of coffee sepa-
rately. The temperature can be set to 2 different levels
(NORMAL, HIGH).

Ⅲ

SELECT PRODUCT

Ⅲ Open the programming door (3). Press the Rotary Switch (4)

until you hear an acoustic signal.

Ⅲ

FILTER
NO or YES

Ⅲ Turn the Rotary Switch (4) until the following message is dis-

played:

Ⅲ

TEMPERATURE

Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ

SELECT PRODUCT

Ⅲ Then press a product key of your choice.