JVC UX-T550 User Manual

Page 12

Programmed play (using the remote control unit)

●

Up to 20 tracks can be programmed to be played in any required order.
The total playing time of programmed tracks is displayed (up to 99 minutes, 59 seconds).
(Example: When programming the 2nd track to be played first, and the 6th track next, then the 12th track, etc.)

Press the CD

button to set to the CD mode.

Press the

button.

Press the PROGRAM button to set to the programming mode.

To confirm the details of a program...
Press the PROGRAM button; the tracks making up the program will be
displayed in programmed order.

⁄

Press to designate the required track number.

Designate the remaining tracks by pressing the track number but-
tons.

Press the

button when programming is completed. Programmed

play starts.

Repeat play (using the remote control unit)

RANDOM

●

Single track repeat (

)

The current or specified track will be played repeatedly.

●

All tracks repeat (

ALL)

All tracks or the programmed tracks of a CD will be played repeat-
edly.

Random play (using the remote control unit)

Press the RANDOM button, and all tracks on a CD play once in random
order.

To clear the programmed tracks...
Press the

button before playing a CD. During programmed play, press

this button twice. When the CD holder is opened, programmed tracks
are cleared automatically.

Notes:

●

If the total playing time of the programmed tracks exceeds 99 min-
utes 59 seconds, the total playing time indication will go out.

●

When programming a track number higher than 21 on a disc contain-
ing more than 21 tracks, the total playback time of all the programmed
tracks will not be displayed.

●

When a disc with 16 or more tracks is loaded, the “OVER” indicator
will appear.

PROGRAM

Program order number

Track number

Press the REPEAT button before or during play. A single track or all the
tracks can be repeated.

Whether a single track or all tracks are to be repeated can be specified.
Each time the REPEAT button is pressed, the mode will change from a
single track (

), to all the tracks (

ALL), to the clear mode, in this

order.

PROGRAM

C D

PROGRAM

⁄

C D

+10

To designate the 2nd track.

The total playback time of programmed tracks
is displayed.

The 12th track

To designate the 12th track.

Repeat playback is released.

ALL

REPEAT

Goes off.

Single track

All tracks

UX-T550(B)_body.pm6

12/12/00, 3:11 PM