Fitting the trimmer guard and trimmer head, Guard, Trimmer head – Jonsered GC 2125C User Manual
Page 14: Assembly
14 –
English
ASSEMBLY
Fitting the trimmer guard and
trimmer head
(GT 2125)
Guard
•
Fit the guard as shown in the diagram. Tighten securely.
Trimmer head
•
Fit the dust cup on the shaft. The nut must be completely
covered by the dust cup.
•
Hold the dust cup with a spanner to prevent the shaft from
rotating.
•
Screw the trimmer head onto the shaft.