JVC CA-MXK3R - Manual (Page 16)

13
Using the Tuner
English
Engl
ish
English
English
Engli
s
h
English
Engl
ish
LVT0686-009B / CA-K1R/CA-K3R(B) / English
To temporarily switch to a broadcast program of
your choice
EON (Enhanced Other Networks) is another convenient RDS serv-
ice that allows this unit to switch temporarily to a broadcast pro-
gram of your choice (NEWS, TA or INFO) from the currently
selected station, except if you are listening to a non-RDS station
(all AM (MW/LW) stations or some FM stations).
• The EON function is only applicable to the preset stations. See
page 10.
• If an FM station does not broadcast EON information, EON
cannot be activated.
To select a program type
1 Press the PTY/EON button twice while listen-
ing to an FM station.
“EON” and “SELECT” alternately appear on the display.
2 Select the program type using the SELECT +
or – button within 10 seconds.
The display shows a program type in the following order:
TA: Traffic Announcement
NEWS: News
INFO: Programs on medical service, weather forecast, etc.
OFF:
EON off
3 Press the PTY/EON button within 10 seconds
again to set the selected program type.
The selected program type indicator lights up on the display,
and the unit enters EON Standby mode.
• The EON indicator lights up when tuned to a station which pro-
vides EON information.
Case 1: If there is no station broadcasting the type of
program you have selected
The broadcast station being currently heard will continue to be
heard.
«
When a station starts broadcasting the program you have selected,
this unit automatically switches to the station. The program type
(TA, NEWS or INFO) indicator starts blinking.
«
When the program is over, this unit goes back to the currently se-
lected station, but still remains in EON Standby mode.
Case 2: If there is a station broadcasting the type of pro-
gram you have selected
This unit tunes to the station broadcasting the program. The pro-
gram type (TA, NEWS or INFO) indicator starts blinking.
«
When the program is over, this unit goes back to the currently se-
lected station, but still remains in EON Standby mode.
To stop listening to the program selected by EON
Press the PTY/EON button so that the program type (TA, NEWS
or INFO) indicator goes off.
• In EON standby mode, if you change the source or turn
off the power, EON standby mode is canceled temporar-
ily.
• When the EON is being operated (i.e. the selected pro-
gram type is being received from the broadcast station)
and if the DISPLAY MODE or SELECT button is operated,
the station will not switch back to the current selected sta-
tion even after the program ends. The program type indi-
cator remains in the display, indicating that the EON is in
standby mode.
• When the EON is in standby mode and a radio broadcast
is being recorded, be careful because the EON may be
activated and a different program than the intended one
may be recorded.
When the EON mode is not required, release the EON
mode.
• When the alarm signal is detected by EON, the station
broadcasting alarm is received with priority. “ALARM!” is
not displayed.
CAUTION:
• When the sound alternated intermittently be-
tween the station tuned in by the EON function
and the current selected station, cancel the EON
mode. This does not constitute malfunction of
the unit.
PTY/EON PTY/EON
SELECT PTY / EON PTY / EON
SELECT
On the Unit
On the Remote Control
(twice)
(twice)
TA NEWS INFO
OFF
MX-K1R&MX-K3R(B).book Page 13 Friday, March 23, 2001 9:49 AM