Jensen JMC-1000 - Manual (Page 30)

29
MS9903TT_ib080503.p65 5/8/2003, 11:44 28
TROUBLESHOOTING GUIDE
Symptom
The unit does not
respond (no power)
AM band is too noisy
Radio paused about 1
second when switch
from phonograph mode
to tuner mode
Sound is distorted
CD Player does not
play.
CD skips while playing
Unit gets warm after
extended play at high
volume
Possible Problem
AC cord is not plugged
into a wall outlet
Wall outlet is not
functioning.
The reception at the set
location is poor.
This is normal.
Solution
Plug the AC cord into a wall outlet.
Plug another device into the same outlet
to confirm the outlet is working.
Slightly rotate the unit for the best
reception.
Radio will resume normal function in
1~2 seconds.
Decrease the volume.
Try a different audio source such as a
music CD.
Change the EQ setting.
Slide the FUNCTION switch to select
CD mode.
Press the CD onto spindle, printed side
facing up.
Wipe with cloth or another disc.
Turn the unit off for a period of time or
lower volume.
Volume level is set too high
Sound source is distorted.
CD mode is not selected
CD is not installed or
installed incorrectly
Disc is dirty or scratched.
This is normal.