Jabra BTE4 - Manual (Page 5)

4
Jabra sport
GettInG started
Follow these three steps before using your headset:
1 Charge your headset (approximately 2 hours)
2 activate bluetooth® on your mobile phone (refer to the manual
for your mobile phone)
3 pair your headset to your mobile phone
CharGInG your Jabra sPort
Make sure that your Jabra sport is fully charged before you start
using it for the first time . While charging, the battery indicator
light is flashing green and when fully charged the Led indicator is
solid green . Charging time is approximately 2 hours .
Please note: The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period. Jabra therefore
recommends that you recharge your device at least once a month.
turnInG your Jabra sPort on and oFF
to turn your Jabra sport on press the on/off button (a) until the
Led flashes blue . to turn your Jabra sport off press the on/off
button until the Led flashes blue .
PaIrInG your Jabra sPort to a Phone or
other deVICe
headsets are connected to phones or other bluetooth devices
using a procedure called ‘pairing’ . by following a few simple steps,
pairing can be done in a matter of seconds .
1. Put the headset in pairing mode
1 .1a: First time pairing:
turn on your Jabra sport and it will automatically enter pairing
mode and is ready to pair .
1 .1b: Later pairing:
1 .2 Make sure the Jabra sport is off . put the sport into pairing
mode – press and hold the answer/end button (a) until the
indicator light flashes blue (the first time you turn on the
Jabra sport it will be in pairing mode) .
1 .3 search for bluetooth devices on your phone* or other device
and select the Jabra sport .