beautypg.com

Listening to the sound of other audio device, Listening to the sound of external audio device, Listening to the sound of portable audio device – JVC CA-EXD11 User Manual

Page 79

background image

33

Connect the other audio device to this system in
advance (page 10).

1

Press AUX.

The source changes to AUX.
Each time you press the button, the source
changes between AUX 1 (front) and AUX 2
(rear).

2

Play the other audio device.

For details, refer to the manual of the device
connected.

3

Adjust the volume and the
sound quality of the system
(page 16).

By using QP Link (Quick Portable Link), you can
easily start playing back a portable audio device
connected to the AUX 1 jack.
• Make sure to set the volume of your portable

audio device loud enough so that system can
detect the sound signal.

• QP Link is available even if the system is on

standby.

Press and hold SET/QP LINK.

• Each time you press and hold the button, the QP

Link function turns on and off alternately.

• QPL ON appears when QP Link is activated.

When QP Link is activated, connecting the
portable audio device to the AUX 1 jack and
starting playback performs the following:
While listening to another source...

Changes the source to AUX 1 automatically. (If
you change from AUX 1 to another source, QP
Link will be canceled.)

While the system is on standby...

Turns on the system and activates the AUX 1
source automatically (except when the display is
turned off.)

NOTE

Changing from AUX 1 to another source while
QP Link

works will deactivate QP Link temporarily.

In this case, the following reactivates QP Link:

– Pressing and holding SET/QP LINK on the

remote control.

– Unplug the device from the AUX 1 jack, then plug

it in again.

If you press

AUDIO to turn the system off or

if

preset Timer turns the system off while QP Link

works, the system will deactivate QP Link
temporarily. In such cases, the following reactivates
QP Link:

– When the sound signal from the AUX 1 jack

stops or is too weak for about 30 seconds after
the system is turned off.

– When you turn on the power again.

QP Link may start working when you just plug in
the

device to the AUX 1 jack or unplug it. This is not

a malfunction.

Listening to the sound of
external audio device

Listening to the sound of
portable audio device

Listening to the sound of other audio device

Convenient functions

EX-D11[U].book Page 33 Tuesday, May 30, 2006 4:13 PM