John Lewis JLUCLFW6003 - Manual (Page 10)

10
When the refrigerator is first
installed
General information
This appliance is designed for the refrigeration of food in a
domestic home.
To ensure correct operation, the appliance should be
located where the ambient temperature is between
16-32°C.
Using the Appliance
Before Use
Remove all securing tapes.
Wash the inside of the appliance with lukewarm water with
a little bicarbonate of soda added (5 ml to 0,5 litre of water).
Do not use soap or detergent as the smell may linger. Dry
the appliance thoroughly.
Do not use detergents, abrasive powders, highly
perfumed cleaning products, wax polishes or products
containing alcohol.
)
To Start the Appliance
1. Allow the appliance to stand for 2 hrs after installation.
2. Plug in the appliance and switch on at the mains supply.
3. Turn the thermostat control to the required setting. A
setting of 3 is usually suitable for normal operation (see
thermostat control).
4. Leave the appliance for approximately 4 hours for the
correct temperature to be reached before placing food
inside.
Thermostat Control
The thermostat control knob situated inside the
refrigerator regulates the temperature of the larder
compartment. Thermostat control is marked from 1-5 the
higher the number, the colder the setting.
Position 0
- Off
Position 1 - minimum coldness
Position 5 - maximum coldness