Jbl es series speaker systems, Specifications – JBL ES25C User Manual
Page 2
Harman Consumer Group, Inc.
2, route de Tours, 72500 Château du Loir, France • 250 Crossways Park Drive, Woodbury, NY 11797, USA • 8500 Balboa Boulevard, Northridge, CA 91329, USA
www.jbl.com
© 2007 Harman International Industries, Incorporated. All rights reserved. JBL is a trademark of Harman International Industries, Incorporated, registered
in the United States and/or other countries. Elliptical Oblate Spheroidal (EOS), PolyPlas, Straight-Line Signal Path, FreeFlow and IsoPower are trademarks
of Harman International Industries, Incorporated.
Features, specifications and appearance are subject to change without notice.
Specifications
Frequency response (–3dB): 80Hz – 40kHz
Max. recommended amplifier power*: 150W
Power handling (continuous/peak): 75W/300W
Sensitivity (2.83V/1m): 90dB
Nominal impedance: 8 Ohms
Crossover frequencies: 3000Hz– 24dB/octave; 12000Hz– 18dB/octave
Low-frequency transducer: Dual 130mm (5") PolyPlas, shielded
Midrange transducer: NA
High-frequency transducer: 19mm (3/4") Titanium-laminate dome, shielded; EOS waveguide
Ultrahigh-frequency transducer: 19mm (3/4") Polyester-film, ring-radiator, shielded; EOS waveguide
Dimensions with grille (H x W x D): 178mm x 476mm x 254mm (7" x 18-3/4" x 10")
Weight per speaker: 7.6kg (16.7 lb)
* The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks.
We do not recommend sustained operation at these maximum power levels.
JBL ES Series Speaker Systems
ES25c