JVC HR-J785EK - Manual (Page 26)

basic features 26
24H Express Timer
Programming
You can program a timer recording that starts within 24 hours using the 24H
EXPRESS
c button and the Advanced JOG Dial on the VCR.
enter progr am mode
Press the 24H
EXPRESS c button on the VCR. The
Programme Start Time indicator starts blinking
on the display panel.
set start time
Turn the JOG Dial to the right
or left. One click stop of the JOG Dial changes
the time in 5-minute intervals.
set stop time
Push the center part of the JOG
Dial . The Programme Stop Time indicator starts
blinking on the display panel. Turn the JOG Dial
to the right or left.
set preset position
Push the center part of
the JOG Dial . Turn the JOG Dial to the right or
left.
engage timer mode
Press the 24H EXPRESS c button on the VCR. The VCR
turns off automatically and c is displayed on the display panel.
• Before pressing the 24H EXPRESS c button to engage the timer mode, you
can cancel the setting at anytime by pressing the center part of the JOG Dial for
more than 3 seconds. Repeat the above steps from setting the start time.
Notes
• You can set this VCR to timer record up to eight programmes. If you try enter
a ninth, FULL appears on the display panel.
• If Err appears on the display panel, repeat the above steps again.
• When a menu screen is shown, you cannot use the 24H Express Timer
Programming function. Press MENU to return to normal screen, and try again.
• You can use the 24H Express Timer Programming function also when the
VCR is turned off.
• For the 24H Express Timer Programming function, the program overlap
warning display does not appear even if some programmes overlap each
other.
before you start
Set the tape speed
Make sure that the
VCR’s clock is set
correctly
Insert a cassette with
the safety tab in place
Turn on the TV and
select the Video channel
or the AV Mode
VCR
SAT
REVIEW
VCR
SAT
REVIEW
VCR
SAT
REVIEW
VCR
SAT
REVIEW