beautypg.com

English, Press fm/am to select the band, Press fm/am – JVC LVT0142-006A User Manual

Page 17: Press 10 keys to select a preset channel number

background image

14

English

FM/AM

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to
receive or noisy

You can change the FM reception mode while receiving an FM
broadcast.

On the front panel ONLY:

1. Press FM/AM to select the band.

The cursor control

% / fi / @ / # buttons can

be now used for operating the tuner.
• Each time you press the button, the band alternates between

FM and AM.

2. Press cursor control

% / fi

repeatedly until “FM MODE”
appears on the display.

3. Press cursor control

@ / # to

switch the FM reception “AUTO”
or “MONO.”

AUTO: When a program is broadcasted in stereo, you will hear

stereo sound; when in monaural, you will hear
monaural sounds. This mode is also useful to suppress
static noise between stations. The MUTE AUTO
indicator lights up on the display.

MONO: Reception will be improved although you will lose the

stereo effect. In this mode, you will hear noise while
tuning into the stations. The MUTE AUTO indicator
goes off on the display.

100

1k

10k

VOLUME

EON

TA
NEWS
INFO

100

1k

10k

MUTE AUTO

VOLUME

EON

TA
NEWS
INFO

100

1k

10k

VOLUME

EON

TA
NEWS
INFO

To tune in a preset station

On the front panel:

1. Press FM/AM to select the band.

The cursor control

% / fi / @ / # buttons can

be now used for operating the tuner.
• Each time you press the button, the band alternates between

FM and AM.

2. Press cursor control

% / fi

repeatedly until “ – PRESET +”
appears on the display.

3. Press cursor control

@ / # to

select a preset channel station.

• Pressing

@ decreases the preset channel

number.

• Pressing

# increases the preset channel

number.

From the remote control:

1. Press FM/AM.

• Each time you press the button, the band

alternates between FM and AM.

2. Press 10 keys to select a preset

channel number.

• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10.
• For channel number 30, press +10, +10,

then 10.

Note:

When you use the 10 keys on the remote control, be sure that they
are activated for the tuner, not for the CD and others. (See page 31.)

3

2

1

6

5

4

9

8

7

/P

+10

0

10

SURROUND

TEST

DELAY

EFFECT

– CENTER +

– REAR•L +

ENTER

RETURN

MENU

– REAR•R +

100+

FM/AM

FM/AM

EN08_20.RX-669PGD[UB]/f

99.2.2, 1:18 PM

14

This manual is related to the following products: