Johnson Controls LOGMAN II 1 - Manual (Page 2)

Package Contents
The LogMan II is supplied with the following:
• PSION Workabout Pro Second Generation Hand-Held Computer
• PSION Workabout Pro Desktop Docking Station with AC power adaptor,
adaptor plugs, and USB A-B cable
• LogView software installation CD-ROM (trial version)
• Standard multi-cable for controller connection
• This “Getting Started” Guide
First Use
The LogMan II is ready to use after charging the battery. Get started as
follows.
Step Action
1 Connect the docking station to AC power using the provided
power supply and plug adaptor.
2 Insert the hand-held computer into the docking station and
press it down until it locks. Allow the battery to charge for up to
6 hours. A full charge is indicated by solid green light from the
charging indicator, which is located above the key.
It is recommended that you place the LogMan II in the docking
station when not in use to keep the battery fully charged.
3 To turn on the device, press and hold the button for a
second or two. To turn off the device, press the blue key
followed by the key.
4 From the startup menu, use the up/down arrow keys to select
“LogMan” and press .
5 Using the included multi-connector cable, connect the female 9-
pin D plug to the top of the hand-held computer. Locate the
connector that fits the controller’s data port and plug it in.
6 From the main menu, press <1> to select “Automatic
Operation”. The “Connect to Controller” screen opens. Use the
up and down arrow keys to select the controller type.
7 Press to initiate log retrieval. When the transfer is
completed, press to return to the previous menu.
Software Installation
Follow the steps below to install LogView from the installation CD-ROM.
Step Action
1 Start by saving anything you are working on and closing all
programs.
2 Insert the installation CD-ROM into your compact disk drive.
3 On most systems the YORK InstallManager opens automatically
and you can proceed to the next step. If the InstallManager does
not open, then do as follows.
• From your Start menu click My Computer, or, from your
desktop, double-click My Computer.
• Double-click the compact disc drive in the list of storage drives
and folders. If the InstallManager now opens, go to the next
step.
• Double-click the icon for the install file. The
InstallManager opens.
4 Click Install LogView.
5 Follow the instructions on screen to install the software.
6 Close the InstallManager window when installation is completed.