beautypg.com

Connections to a tv or vcr, Pg. 22, Pg. 22) – JVC GR-D280 User Manual

Page 22

background image

VIDEO PLAYBACK

22

EN

MasterPage: Left

A Black to S-VIDEO IN (Connect when your TV/

VCR has S-VIDEO IN and A/V input
connectors. In this case, it is not necessary to
connect the yellow video cable.)

B Yellow to VIDEO IN (Connect when your TV/

VCR has only A/V input connectors.)

C Red to AUDIO R IN**

D White to AUDIO L IN**

*

If your VCR has a SCART connector, use the
provided cable adapter.

** Not required for watching still images only.

NOTE:

Set the video out select switch of the cable adapter
as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.

1

Make sure all units are turned off.

2

Connect the camcorder to a TV or VCR as

shown in the illustration.

If using a VCR, go to step

3.

If not, go to step

4.

3

Connect the VCR output to the TV input,

referring to your VCR’s instruction manual.

4

Turn on the camcorder, the VCR and the TV.

5

Set the VCR to its AUX input mode, and set

the TV to its VIDEO mode.

6

Start playback on the camcorder. (

੬ pg. 20)

To choose whether or not the following
displays appear on the connected TV

● Date/Time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(

੬ pg. 31, 36)

Or, press DISPLAY on the remote control to turn
on/off the date indication.

● Time Code

Set “TIME CODE” to “ON” or “OFF”.
(

੬ pg. 31, 36)

● Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(

੬ pg. 31, 36)

NOTES:

It is recommended to use the AC Adapter as

the power supply instead of the battery pack.
(

pg. 14)

● To monitor the picture and sound from the

camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch to “A” or
“M”, then set your TV to the appropriate input
mode.

● Make sure you adjust the TV sound volume to its

minimum level to avoid a sudden burst of sound
when the camcorder is turned on.

Connections To A TV Or VCR

2

4

1

3

TV

VCR

Open the cover.

To AV

connector

To TV or VCR

“Y/C”/“CVBS”

Video Out Select

Switch

Cable
Adapter*

S/AV cable

(provided)

mark

GR-D280PAL.book Page 22 Saturday, January 22, 2005 4:09 PM