GE RM24977 User Manual

Page 6

Using Your Remote, cont.

Controlling Devices with Separate
Power On and Off Buttons

Some GE, RCA and ProScan models require you to
press the device button for more than one second
to turn the device on and the

POWER

button to turn

the device off.

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD,
DVD/VCR, etc.) will require you to set up two
different Mode buttons to control both parts of the
Combo device. For example, if you have a TV/DVD
Combo, you might need to set up one code under
the TV button to control the TV part AND a
separate code (under any other Mode button) to
control the DVD part.

VCR/DVD Punch-Through

This remote allows the 6 VCR transport buttons
(i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC)
to Punch-Through control from any Mode
programmed with TV, SAT or Cable codes to the
last VCR, or DVD programmed Mode you used.
This feature will not operate if the programmed TV,
SAT or Cable code has its own VCR transport
button control e.g. a TV Combo, SAT/PVR, etc.

Using Your Remote

Code Identification

The Code Identification Feature allows you to
identify the four digit library code stored under your
device key. For example, if you want to find out what
four digit code is stored under your TV device key,
follow the six steps below:

1. Press and hold the

CODE SEARCH

button

until the red indicator stays on.
Release the

CODE SEARCH

button.

2. Press and release the desired mode

button (TV,

VCR

, etc.). The red

indicator blinks, then stays lit.

3. Press and release the

CODE SEARCH

button. The red indicator blinks once
and remains lit.

4. To find the first digit for

the code stored under
the mode key pressed
in step 2, press each
numeric key from 0-9
in turn. The number
that causes the
indicator light to blink
is the first digit in your
code.

5. To find the second digit, repeat step 4.

6. Repeat step 4 to find the third and fourth digit.

This

time the red indicator turns off and stays off.