Operational instructions, Setup menu – Jwin JP-127 User Manual
Page 11
Digital Photo Frame V10M10_IM_EN_12192007
www.jWIN.com
- 10 -
OPERATIONAL INSTRUCTIONS
Using a Memory Card or USB
1.
Insert a memory card (SD/MMC/MS only) into the card
slot on the side of the frame. Be certain to line up the card
correctly as indicated on the slot.
2.
Insert a USB thumb drive into the USB jack on the side of
the frame.
3.
To remove the memory card pull straight out from the slot.
Note: This photo frame can only display JPEG format. If
you wish to display photos from a different digital format,
they must first be converted to JPEG in order to play on
the JP-127.
Setup menu
1. Press
the
LEFT/RIGHT button and select
“Setup” from the Main menu.
2. Press
the
PLAY/SEL button
3. Press
the
UP/DOWN/LEFT/RIGHT
buttons to select an item.
4. Press
the
PLAY/SEL button to confirm.
Note: To leave the Setup menu, select “Exit Setup Menu
from the Setup menu or press the MODE button again.