Jensen Tools DV1628 User Manual

Page 5

CLK

SCN

RND

D.DN

D.UP

AS/PS

DSP

RPT

toggle between EQ settings, each press will toggle from
Flat, Classic, Pop, Rock, to off.

14.

Angle:

Allows the viewer to view the DVD at

different angles if the DVD is recorded with this feature.
Press the angle button while the DVD is Stopped. Then
press the

to adjust the brightness and contrast

levels.

15.

Disp/Clock:

Press to display the Clock or Disc

information. Setting the clock: Press and hold the
Disp/Clock button until the display begins to flash. Press
the #6

to adjust the hours or minutes.

16.

Subtitle:

Changes the subtitles language on the

DVD if the DVD is recorded with this feature.

17.

Title:

Displays the title that is stored on the

CD/DVD.

18.

Setup:

Displays the setup menu.

19. 0-9:

Numeric key buttons.

20. M1-M6:

Selects the Radio stations stored in the

memory.

21. Scan:

Scans the entire disc and plays the first

10 seconds of each track.

22. Repeat:

Replays the current disc or track.

23. Random:

Plays the disc in random.

24. Disc- / Disc+:

Chooses the CD/DVD, ( only if CDC or

DVDC is connected.

25. Reset:

Reset button, press only if the unit is

locked up. This resets the unit to the factory settings.

26. Remote IR:

Receiving sensor for the remote control.

27. Display:

Main unit display

28. Eject:

Eject the CD or DVD

29. Smart Mode / Disc:

Press the Smart mode button to put the

unit into Smart mode. See Smart mode function. In DVD
changer mode ( Only if DVDC is connected ) press the button
to enter the Disc Menu.