Jacuzzi Elara 7242 - Manual (Page 2)

Technical Specifications
DimenSionS
72” L x 42” W x 26” H
(1829 mm) L x (1067 mm) W x (660 mm) H
Drain/overflow
A: 18-1/2” (470 mm) B: 9.6” (244 mm)
CuTouT
70” (1778 mm) x 40” (1016 mm) & undermount template BZ50000
ToTal weighT
1060 lb. (481 kg) / 51 lb/ft
2 (247 kg/m 2 )
operaTing gallonage
100 U.S. Gal. (379 Liters)
Min. 95 U.S. Gal. (360 Liters)
Max. 105 U.S. Gal. (398 Liters)
proDuCT weighT
178 lb. (81 kg)
SkirT mounTing
Not Available
eleCTriCal SpeCifiCaTionS
requires a dedicated gfCi protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
heaTer (STanDarD)
requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N BN60000
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inSTallaTion noTeS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR95000 01/08
elara
™
7242
Salon ™ Spa
DX50
Elara™ 7242 Salon™ Spa with Chromatherapy —
Right Hand
• Right Hand Drain Location
• Accessories / Hardware:
TheraPro™ Jet Rings Kit: #D095
AccuPro™ 2 Jet Rings Kit: # J869*
Sch 40, Rotary Drain Kit: #DA34
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
72"
42"
21"
4.2"
9.6"
12" x 4"
2"
Heater
Motor
Opt. Service
Access
12" H x 24" L
Service Access
Blower
END VIEW
26"
SIDE VIEW
1/2"
(13 mm)
(Motor)
(Inlet Heater)
(Blower)
42" 72"
DRAIN/OVERFLOW
A
B
product Shown: elara 7242 Salon™ Spa, right
hand Shown model: DX50
* Measurements inside unit represent cutout in floor
to allow for drain/overflow.
Minimum Service Access dimensions given.