Jacuzzi Fuzion 7260 - Manual (Page 2)

Technical Specifications
DimenSionS
72" L x 60" W x 22
3 ⁄ 4 " H
(1829 mm) L x (1524 mm) W x (578 mm) H
Drain/overflow
A: 16-3/4” (425 mm) B: 12-1/16” (306 mm)
CuTouT
71” x 59”
(1803 ) mm x (1499) mm
ToTal weighT
1805 lb. (819 kg) / 60 lb/ft
2 (293 kg/m 2 )
operaTing gallonage
129 U.S. Gal. (488 Liters)
proDuCT weighT
274 lb. (125 kg)
SkirT mounTing
Not Available
eleCTriCal SpeCifiCaTionS
requires a dedicated gfCi protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
heaTer (STanDarD)
RapidHeat™: P/N S750000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inSTallaTion noTeS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR48000 10/07
fuzion
™
7260
whirlpool BaTh, Single w/ ChromaTherapy
eg30 Fuzion™ 7260 Whirlpool—Single Left-hand motor, Teak
eg00 Fuzion™ 7260 Whirlpool—Single Right-hand motor, Teak
eg35 Fuzion™ 7260 Whirlpool—Single Left-hand motor, Wenge
eg05 Fuzion™ 7260 Whirlpool—Single Right-hand motor, Wenge
fuzion
™
7260
whirlpool BaTh, Single w/ illumaTherapy ™
eg45 Fuzion™ 7260 Whirlpool—Single Left-hand motor, Teak
eg15 Fuzion™ 7260 Whirlpool—Single Right-hand motor, Teak
eg50 Fuzion™ 7260 Whirlpool—Single Left-hand motor, Wenge
eg20 Fuzion™ 7260 Whirlpool—Single Right-hand motor, Wenge
• Center Drain Location
• Overflow fitting comes with tub
• Accessories / Hardware:
HTC Jet Trim Kit: #D095
Oval Trim Kit: #N557
BMH 2 Jet trim Kit: # J869 (6 kits required)
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
faucet installation note:
Selecting a faucet for rim mounting: The combined thickness at the
rim of the tub shell and the wood trim is 2” (50,8 mm) nominal.
The length of the faucet tailpiece(s) must be long enough to extend
past this dimension and have ample clearance to assemble any
hardware (i.e. locknut, water supply fittings, etc.) necessary for
installation. FUZION 7260 SINGLE MOTOR WITH WOOD FRAME
LEFT HAND MOTOR
72"
60"
36"
24.19"
12"
8.47"
18-1/2" x 4"
Motor
Heater (S)
12" H x 18"
L
Service Access
product Shown: fuzion™ 7260 whirlpool Bath Teak
with illumatherapy Single left hand motor model:eg45
* Measurements inside unit represent cutout in floor to
allow for drain/overflow.
Minimum Service Access dimensions given.
(Motor)
(Heater)
DRAIN/OVERFLOW
SIDE VIEW END VIEW
L
H
W
B
A
6-1/4" (159 mm)