Indesit FID20 Mk2 - Manual (Page 21)

Conventional Grilling
20
CAUTION – ACCESSIBLE PARTS MAY BECOME HOT WHEN THE GRILL IS IN USE.
CHILDREN SHOULD BE KEPT AWAY. GRILLING SHOULD NEVER BE UNDERTAKEN WITH THE
GRILL/TOP OVEN DOOR CLOSED.
The grill control is designed to provide variable heat control, either turning the control clockwise
for the twin grill elements on together or turning anti-clockwise for the single, left hand grill
element only. You can select a power level of MIN through to MAX, in both directions.
The control is Off at O.
Note: The grill will not operate unless the top oven control is in the OFF position.
Food which requires browning only should be placed under the hot grill, directly on the shelf in
the first or second runner from the bottom of the oven, according to the depth of the dish. Open
the grill door to the grilling position, ie. open fully.
With the grill door in the grilling position, heating the grill is achieved by turning the control
clockwise to the desired ‘grill setting’ on the control panel, as described under ‘setting the grill’.
Never: Line the grill pan with aluminium foil.
Note: When the door is open, air will be blown from beneath the controls by the cooling fan, and
when controls are in the Off position. Preheat the grill at setting MAX for approximately 5
minutes. The grill pan is placed on the shelf and should be correctly positioned under the grill
element. Leave the control at MAX for toast, sealing and fast cooking of foods. For thicker foods
requiring longer cooking, turn the switch to a lower setting after the initial sealing on both sides
at MAX. The thicker the food, the lower the control should be set.