beautypg.com

Troubleshooting – Indesit IDC 75 User Manual

Page 11

background image

EN

11

Troubleshooting

Possible causes / Solutions:

• The plug has not been inserted far enough into the socket to make contact.

• There has been a power cut.

• The fuse has burned out. Try connecting another appliance to the same socket.

• If an extension cord is used, try connecting the dryer plug directly into the socket.

• The door has not been closed properly.

• The programme has not been set correctly (see How to carry out a drying cycle).

• The

START

button has not been pressed (see How to carry out a drying cycle).

• The filter has not been cleaned (see Care and maintenance).

• The water container must be emptied? The “Empty water container” indicator light

flashes (see Care and maintenance).

• The condenser needs to be cleaned (see Care and maintenance).

• An incorrect drying time was selected for the type of load (see Laundry).

• The air intake grille are clogged up (see “Installation” and “Care and Maintenance”).

• The items are too wet (see Laundry).

• The dryer is overloaded (see Laundry).

• The water container was probably not emptied before starting the programme. Do

not wait for the signal for emptying the water container, but always check and

empty it before starting a new drying programme (see Description of the tumble

dryer).

• It is normal: the “Empty water container” indicator light flashes when the water

container is full. If the indicator light is on but is not flashing, it only signals that the

water container must be emptied (see Description of the tumble dryer).

• This is normal, especially if the dryer has not been used for a long time. If the noise

persists during the entire cycle, contact the Technical Assistance Centre.

If you feel that the dryer is not working properly, consult the following troubleshooting suggestions before contacting the Technical

Assistance Centre

(see Assistance).

Problem:

The dryer does not start.

Drying times are too long.

The “Empty water container”

indicator light flashes, but the

dryer has been running for a short

time.

The “Empty water container”

indicator light is on but the water

container is not full.

The dryer is noisy during the first

few minutes of operation.