Icom IC-F610 - Manual (Page 35)

30
CE
CE Versions of the IC-F610 which display the “CE”
symbol on the serial number seal, comply with the
essential requirements of the European Radio and
Telecommunication Terminal Directive 1999/5/EC.
This warning symbol indicates that this equipment
operates in non-harmonised frequency bands and/or
may be subject to licensing conditions in the country of
use. Be sure to check that you have the correct ver-
sion of this radio or the correct programming of this
radio, to comply with national licensing requirement.
DECLARATION
OF CONFORMITY
We Icom Inc. Japan
1-1-32, Kamiminami, Hirano-ku
Osaka 547-0003, Japan
Kind of equipment: UHF TRANSCEIVER
This compliance is based on conformity with the following harmonised
standards, specifications or documents:
i) EN 300 279 (February 1999)
ii) EN 60950 August 1992, A11 1997
iii)˚EN 300 086 (March 2001)
iv) EN 300 219 (March 2001)
v) EN 300 113 (March 2001)
Type-designation: iC-f610
Signature
T. Maebayashi
General Manager
Authorized representative name
Icom (Europe) GmbH
Himmelgeister straße 100
D-40225 Düsseldorf
Place and date of issue
Düsseldorf 10 Apr. 2002
Declare on our sole responsibility that this equipment complies with the
essential requirements of the Radio and Telecommunications Terminal
Equipment Directive, 1999/5/EC, and that any applicable Essential Test
Suite measurements have been performed.
Version (where applicable):
0168
440—490 MHz 12.5 KHz/ 25 KHz
440—490 MHz 12.5 KHz/ 20 KHz
400—430 MHz 12.5 KHz/ 25 KHz
IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 35 (1,1)