Installation – Indesit KD6G25M User Manual

Page 18

STABILITY CHAIN

A hole in the gas inlet valve bracket can be used to

engage a stability chain.

CONNECTING TO GAS SUPPLY

300

670

Connection to the cooker should be made with an

approved appliance flexible connection to BS 669. A

length of 0.9 to 1.25m is recommended. The length

of hose chosen should be such that when the cooker

is in situ, the hose does not touch the floor.

Those cookers converted to use on LPG should be

connected with a hose suitable for LPG and capable

of withstanding a pressure of 50 mbar.

An adaptor backplate should be fitted within the

shaded area shown, to allow the cooker to be

pushed fully to the wall and to ensure that the

flexible hose is only likely to come into contact with

areas at the rear of the cooker that do not exceed a

temperature rise of 70°C.

Installation