Indesit ISA60V - Manual (Page 11)

GB
11
Troubleshooting
Problem:
The tumble dryer won’t start.
Drying cycle will not begin.
Its taking a long time to dry.
Possible causes / Solution:
● The plug is not plugged into the socket, or not making contact.
●
There has been a power failure.
●
The fuse has blown. Try to plug another appliance into the socket.
● You are using an extension cord? Try to plug the dryer’s power cord
directly into the socket.
●
The door is not closed securely?
● The PROGRAMMES knob has not been set properly ( see Start and
Programmes ).
●
The START button has not been pressed ( see Start and Programmes ).
●
You have set a delayed time ( see Start and Programmes ).
●
The filter has not been cleaned ( see Maintenance ).
● The temperature setting is not ideal for the type of fabric you are drying
(
see Start and Programmes ).
●
Auto Programmes require a HIGH temperature setting ( see Start and
Programmes ).
● The correct programme has not been selected for the load ( see Start
and Programmes ).
● The flexible vent tube is obstructed ( see Installation ).
● The air intake vent is obstructed ( see Installation ).
●
The permanent ventilation flap on the storm cover is obstructed ( see
Installation ).
● The items were too wet ( see Laundry ).
●
The dryer was overloaded ( see Laundry ).
One day your dryer seems not to be working. Before you call your Service Centre ( see Service ), go through the
following troubleshooting suggestions: