Icom IC-7700 - Manual (Page 44)

3-6
D D Quick tuning step
The operating frequency can be changed in larger
steps (0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz selectable)
for quick tuning.
q Push [TS] to turn the quick tuning function ON.
• “ Z ” appears when the quick tuning function is ON.
w Rotate the main dial to change the frequency in pro-
grammed kHz steps.
e Push [TS] again to turn OFF the indicator.
r Rotate the main dial for normal tuning if desired.
3
BASIC OPERATIONS
Quick tuning indicator
D D 1 ⁄
4
tuning step function
When operating in SSB data, CW, RTTY or PSK, the
1 ⁄ 4 tuning function is available. Dial rotation is reduced
to 1 ⁄ 4 of normal speed when the 1 ⁄ 4 tuning function is
ON for finer tuning control.
➥
Push [1/4] (MF6) to toggle the 1 ⁄ 4 tuning function ON
and OFF.
• “ ” appears when the 1 ⁄ 4 tuning function is ON. 1 ⁄ 4
D D Selecting “kHz” step
q Push [TS] to turn the quick tuning function ON and
OFF.
• “ Z ” appears when the quick tuning function ON.
w Push and hold [TS] for 1 sec. to enter quick tuning
step set mode.
• Selected tuning steps for all modes appear.
e Select the desired operating mode.
r Rotate the main dial to select the desired tuning step.
t Repeat steps e and r to select quick tuning steps
for other modes, if desired.
y Push to exit the setting display.
NOTE: When entering quick tuning step set mode,
the quick tuning function must be activated first.
EXIT/SET
Main dial Select mode
TS
1/4
1 ⁄ 4 tuning step OFF 1 ⁄ 4 tuning step ON
1 / 4
ON
1 / 4
OFF