beautypg.com

Maintenance and care – Indesit UFAN 400 User Manual

Page 6

background image

6

GB

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to
disconnect the appliance from the electricity supply:

1. set the TEMPERATURE CONTROL Knob on

2. pull the plug out of the socket

Cleaning the appliance

• The external and internal parts, as well as the rubber

seals may be cleaned using a sponge that has been
soaked in lukewarm water and bicarbonate of soda or
neutral soap. Do not use solvents, abrasive products,
bleach or ammonia.

• The removable accessories may be soaked in warm

water and soap or dishwashing liquid. Rinse and dry
them carefully.

• The back of the appliance may collect dust which can

be removed by delicately using the hose of a vacuum
cleaner set on medium power. The appliance must be
switched off and the plug must be pulled out before
cleaning the appliance.

Avoiding mould and unpleasant odours

• The appliance is manufactured with hygienic materials

which are odour free. In order to maintain an odour free
refrigerator and to prevent the formation of stains, food
must always be covered or sealed properly.

• If you want to switch the appliance off for an extended

period of time, clean the inside and leave the doors
open.

Defrosting the appliance

! Follow the instructions below.
Do not speed up the defrosting process by using any
tools or electrical devices other than the scraper
provided, you may damage the refrigeration circuit.

Remove frost regularly using the special scraper
provided. If the frost layer is greater than 5 mm, it is
necessary to defrost manually:

1. The day before, turn the TEMPERATURE ADJUSTMENT

knob to the SUPER position (the yellow SUPERFREEZE
indicator light will illuminate) to further cool the food.

2. After 24 hours, turn the TEMPERATURE ADJUSTMENT

knob to , which will switch the refrigerator off.

3. Wrap frozen foods in newspaper and place them in

another freezer or in a cool place.

4. Leave the door open until the frost has melted

completely. This can be made easier by placing
containers with lukewarm water in the freezer
compartment..

5. Certain appliances are
fitted with the DRAIN
SYSTEM to lead the water
outside. Let the water flow
into a container (

see

diagram).

6. Clean and dry the
freezer compartment
carefully before switching
the appliance on again.

7. Wait for approximately 2 hours, i.e. until the ideal

storage conditions have been restored, before
placing food in the freezer compartment.

This manual is related to the following products: