iHome IA63 - Manual (Page 10)

9
Using the Aux-in Jack
You can play any portable audio device with a standard 3.5 mm headphone jack through the iA63 via the Line-in Jack.
NOTE: Do not play an aux audio device while iPhone or iPod is docked or you will hear both play at once.
1. Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your device and the
other end of the patch cord into the iA63 Aux-in Jack located on the back of the unit.
2. Turn on and play your device.
3. Press the Play/pause Button on the iA63..
4. Press the or Button to adjust the system volume. You may need to adjust the volume on your external device as well.
6. To turn off the unit, press the Button. Please remember to turn off your device, too.
Sleep Operation
Sleep mode lets you sleep to your iPhone/Pod or radio, gradually lowering the volume until the unit shuts off at the selected
time.
1. Press the Bedtime Button to enter sleep mode. The sleep time will appear in the display.
2. Press the Bedtime Button again as needed to adjust the sleep timer from 90, 60, 30, 15 minutes or OFF.
3. When the display changes back to show the real time, press the Bedtime Button once to show the sleep time remaining.
Pressing it again will change sleep time to next lowest increment.
4. iA63 has an independent volume setting for sleep mode so you can adjust the sleep volume without affecting the normal
volume. Press the or Button to adjust the sleep volume. The sleep volume will remain at that level the next time you
enter sleep mode until controls are changed.
5. To stop listening at any time, press the Button to turn unit off.
Dimmer Operation
During normal operation (when no alarm is sounding), press the Snooze/Dimmer Button to control the brightness of the
LCD display.
Using the iA63 in Other Countries
Different regions of the world use different FM radio frequency steps and ranges. You will need to select the one that matches
the standards in your region (USA, EUROPE, JAPAN, AUSTRALIA,or CHINA). The default setting is USA; if you live in the US,
you may skip this section.
1. Make sure the iA63 is OFF (not playing in any mode). Press and hold the Button for about 5 seconds until
“FM xxx” appears in the display. A beep will sound. Press the + or - Button to set the “xxx” to your region.
2. Press the Button again (or no button within 10 seconds) to exit the radio frequency setting mode. 2 beeps will
confirm the frequency has been set.
Setting Up the iA63