beautypg.com

Maintenance and care – Indesit TZA 1 S User Manual

Page 7

background image

GB

7

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to

disconnect the appliance from the electricity supply:

It is not sufficient to set the temperature adjustment knobs

on “0” (appliance off) to eliminate all electrical contact.

Cleaning the appliance

• The external and internal parts, as well as the rubber

seals may be cleaned using a sponge that has been

soaked in lukewarm water and bicarbonate of soda or

neutral soap. Do not use solvents, abrasive products,

bleach or ammonia.

• The removable accessories may be soaked in warm

water and soap or dishwashing liquid. Rinse and dry

them carefully.

• The back of the appliance may collect dust which can

be removed by delicately using the hose of a vacuum

cleaner set on medium power. The appliance must be

switched off and the plug must be pulled out before

cleaning the appliance.

Avoiding mould and unpleasant odours

• The appliance is manufactured with hygienic materials

which are odour free. In order to maintain an odour free

refrigerator and to prevent the formation of stains, food

must always be covered or sealed properly.

• If you want to switch the appliance off for an extended

period of time, clean the inside and leave the doors

open.

Defrosting the appliance

! Follow the instructions below.

Do not use objects with sharp or pointed edges to defrost

the appliance as these may damage the refrigeration circuit

beyond repair.

If the frost layer is greater than 5 mm, it is necessary to

defrost manually:

1.

Set the TEMPERATURE ADJUSTMENT knob to the “0”

position.

2. Wrap frozen foods in newspaper and place them in

another freezer or in a cool place.

3. Leave the door open until the frost has melted

completely. This can be made easier by placing

containers with lukewarm water in the freezer

compartment..

4. The appliance is

equipped with a system that

collects the water produced

by the defrosting process:

let the water collect in a

container (see figure).

5. Clean and dry the freezer compartment carefully before

switching the appliance on again.

6. Wait for approximately 2 hours, i.e. until the ideal storage

conditions have been restored, before placing food in the

freezer compartment.