Interex TEREX/FUCHS RECYCLING MACHINE MHL331D User Manual
Page 9
09
LIFT HOOK
22,046 lbs
TEREX
®
FUCHS
CACTUS GRAB 0.52 yd
3
Open or half-closed tines
GRAB FOR LIGHTWEIGHT
MATERIALS 0.78 yd
3
Loose goods density up to
2,360 lb/yd
3
MAGNET SYSTEM
Terex
®
Fuchs magnetic plate
RECOMMENDED ATTACHMENTS
HEIGHT
ft
UNDERCARRIAGE
STABILIZERS
15
20
25
30
35
40
35
non supported
(8,330)
4-pt. supported
9,590* (9,590*)
30
non supported
(8,500)
(6,200)
4-pt. supported
11,320* (11,320*)
8,960* (8,960*)
25
non supported
(8,470)
(6,230)
(4,690)
4-pt. supported
11,330* (11,330*)
9,690 (10,720*)
6,930* (6,930*)
20
non supported
(8,270)
(6,120)
(4,680)
4-pt. supported
11,850* (11,850*)
9,580 (10,960*)
7,440 (9,090)
15
non supported
(11,260)
(7,930)
(5,930)
(4,580)
4-pt. supported
14,660* (14,660*)
12,500 (12,820*)
9,370 (11,470*)
7,340 (8,990)
10
non supported
(16,190)
(10,470)
(7,500)
(5,680)
(4,440)
(3,500)
4-pt. supported
22,080* (22,080*)
16,950* (16,950*)
12,010 (14,040*)
9,100 (11,190)
7,190 (8,830)
5,780 (6,880*)
5
non supported
(14,450)
(9,650)
(7,050)
(5,410)
(4,300)
(3,500)
4-pt. supported
25,570 (26,780*)
16,090 (19,210*)
15,510 (14,330)
8,810 (10,890)
7,030 (8,670)
5,780 (6,880*)
0
non supported
(13,460)
(9,110)
(6,730)
(5,230)
(4,190)
4-pt. supported
20,400* (20,400*)
15,350 (19,580)
11,090 (13,890)
8,570 (10,630)
6,900 (8,530)
-5
non supported
(12,790)
(8,630)
(6,420)
(5,040)
(4,100)
4-pt. supported
16,480* (16,480*)
14,920 (19,120)
10,820 (13,600)
8,410 (10,460)
6,820 (8,450)
-10
non supported
(6,320)
4-pt. supported
10,710 (13,490)
REACH ft
Capacity values are stated in (lbs). The pump pressure
is 5,221 psi. The values, in accordance with ISO 10567,
amount to 75% of the static tipping load or 87 % of the
hydraulic lifting force (marked *). They apply to slewing
operations through 360° on a firm and level surface.
Values in brackets apply to the longitudinal direction of
the undercarriage. “Non-supported” values only apply
when the load is hoisted above the front or rear axle.
The weight of the attached hoisting equipment (grab,
coupler, magnet, lift hook, etc.) must be deducted from
the capacity values. In accordance with CE guidelines,
hose-rupture protection valves on the lift cylinders
and an overload warning device are required for crane
operations.