Image HGBE89910f - Manual (Page 9)

9
5
9
Adjustment
Holes
8
ADJUSTMENTS
9
7
ADJUSTING THE SEAT
To adjust the Seat (7), pull out the front Adjustment
Knob (9) as far as possible. Move the Seat to the
desired position, and then release the Adjustment
Knob so that it engages one of the adjustment holes
in the Seat Frame.
The weight bench is designed to be used with the weight rack (HGBC59910/HGBM59910/HGBO59910) and set
of dumbbells (HGWT05910) included with the HIDDEN GROVE furniture. The steps below explain how the
weight bench can be adjusted. See EXERCISE GUIDELINES on page 11 for important exercise information, and
refer to the accompanying exercise guide to see the correct form for each exercise.
Make sure that all parts are properly tightened each time you use the weight bench. Replace any worn parts
immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent.
Do not
use solvents.
ADJUSTING THE BACKREST
The Backrest (8) can be used in a declined position,
a level position, or one of four inclined positions. To
adjust the Backrest, pull out the rear Adjustment Knob
(9) as far as possible. Move the Backrest to the
desired position, and then release the Adjustment
Knob so that it engages one of the adjustment holes
in the Adjustment Bracket.
WARNING:
Make sure that the
Adjustment Knob (9) is fully inserted into an
adjustment hole in the Adjustment Bracket (5)
before using the weight bench.
WARNING:
Make sure that the
Adjustment Knob (9) is fully inserted into an
adjustment hole in the Seat Frame (4) before
using the weight bench.