Advanced settings – IOGear Wireless USB Hub and Adapter Kit GUWH204KIT User Manual
Page 25
24
25
Advanced Settings
The advanced settings of WiCenter allow you to
make changes related to the Channel that data is
being transmitted on, as well as the rate at which
data is sent. The following shows the Advanced
Settings tab which can be accessed by clicking
on Settings Wireless USB Settings, and then
selecting the Advanced tab on the window that
appears. The following shows the default and
recommended settings.
NOTE: Do not change the PHY Rate setting.
Leave this on the recommended and
default setting. The Speed (PHY Rate) will
be automatically set by WiCenter in order
to achieve the best range and throughput
performance.
The default settings are appropriate for most all
situations. Only change channel settings if you
have significantly reduced throughput due to
congested air space.