International Home Products Centiva Floors - Manual (Page 4)

4
PRODUCT CHARACTERISTICS
Classic Series*
Homogeneous: Centiva manufactures homogeneous products for heavy commercial or residential usage. These tiles are
solid vinyl tiles with a standard gauge of 1/8” (3mm).
Multi-layered/Chip
Construction:
Specially developed products in multi-layered sheet form including a recycled backing and high-density wear
layer with a standard gauge of a minimum .30mil (0.8 mm) and/or chip construction throughout.
*M
anufacturing of the Classic Series involves many handcrafted steps. This guarantees each tile receives a random,
natural look.
Event Series
Multi-layered &
Film Photograph:
Specially developed wear layered products are made with at least a .30 mil (0.8 mm) high density, clear PVC
wear layer.
All solid vinyl tiles, as well as the wear layer vinyl tiles and planks, have a standard gauge of 1/8”.
Classic &
Event Series
Color &
Textures: Centiva is available in a wide range of colors and textures, reproducing the look of natural woods, stones,
ceramics and artistic designs. Textures include slate, smooth, granite, embossed, frost, tick and rustic.
Special attention should be paid when selecting a floor for your specific needs. All products can be
customized to fit your specific needs in other colors, sizes, surfaces and gauges. See charts for specific
textures and sizes.
Special Edge
Treatments: Centiva special edge treatments include square edge, slight bevel, and regular bevel.
Applications: All Centiva products can be used for commercial and residential use. The use of IFA adhesive is required in
order to validate the warranty for Centiva tiles or planks. Detailed instructions are listed in the installation
pages of the manual. After installation, a sealer and/or finisher is recommended for easy maintenance.
Samples: Samples are cut from standard tiles and therefore do not correspond exactly to the pattern of the entire
tile. Samples may vary slightly from actual production runs. For critical color match, please check actual
production runs. Chain sets are available upon request. Colors shown in brochures and any other printing
are only as accurate as four color printing process will allow.
PRODUCT ABBREVIATIONS
Product Surface Edge Treatment
Coral Reef CR Slate SS Square Edge SE
Magics MG Smooth GS Slight Bevel SB
Italian Marble IS Granite JS Standard Bevel BE
Concrete CC Embossed ES
New Terrazzo NT Frost FR
U.S. Solids US Tick TK
Ultraplank UP Rustic RU
Plankwood PW
Ultrastone ST
Good Ole Woods HY-GW
Bamboo HY-BB
RiverRock HY-RR
SandStone HY-SD
DesertDune HY-DD
C-Tech CT