Icom IC-M32 - Manual (Page 12)

6
3
PANEL DESCRIPTION
New2001
■ Function display
q TRANSMIT INDICATOR (p. 11)
Appears while transmitting.
w BUSY INDICATOR
Appears when receiving a signal or when the squelch
opens. (p. 11)
“
” blinks while monitoring. (p. 13)
e TAG CHANNEL INDICATOR (p. 15)
Appears when a tag channel is selected.
r CALL CHANNEL INDICATOR (p. 8)
Appears when the call channel is selected.
t LOCK INDICATOR (p. 13)
Appears while the lock function is activated.
y BATTERY INDICATOR
Indicates remaining battery power.
u SCAN INDICATOR (p. 15)
Blinks while scanning.
i DUALWATCH/TRI-WATCH INDICATORS (p. 16)
“DUAL” appears during dualwatch; “TRI” appears during
tri-watch.
o DUPLEX INDICATOR
Appears when a duplex channel is selected.
!0 SUB CHANNEL READOUT
• Indicates Channel 16 during priority scan, dualwatch or
tri-watch. (p. 16)
• Indicates the SET mode item while in SET mode. (p. 17)
• Indicates the squelch level while squelch setting. (p. 10)
• Indicates the volume level while volume setting. (p. 10)
Indication
Full Middle
Charging
required
No battery Battery level
blinks when the battery is exhaustion.
blinks when the battery over charged.
q e r y t w
!5 !3 !4
i
u
o
!2
!1
!0
!8
!6
!7
IC-M32-1.qxd 03.9.25 6:21 PM Page 6 (1,1)