beautypg.com

Troubleshooting – Indesit TZA 1 User Manual

Page 9

background image

GB

9

Troubleshooting

Malfunctions:

The green POWER indicator light

does not illuminate.

The indicator lights are on but the

light is dim.

The WARNING Indicator light is

Always On

The motor runs continuously.

The appliance makes a lot of noise.

Possible causes / Solutions:

• The plug has not been inserted into the electrical socket, or not far

enough to make contact, or there is no power in the house.

• Pull out and reverse the plug before putting it back in the socket.

• The door is closed properly and the seal is still OK?.
• The door is being opened too often.
• The TEMPERATURE CONTROL Knob is on the right setting.

• The TEMPERATURE CONTROL Knob is on “Fast Freeze” setting (rapid

freezing): the yellow FAST FREEZE light is (

see Description).

• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high.
• The thickness of the frost exceeds 2-3 mm (

see Maintenance).

• The appliance has not been installed on a level surface (

see

Installation).

• The appliance has been installed between cabinets that vibrate and

make noise.

• The internal refrigerant makes a slight noise even when the compressor

is off. This is not a defect, it is normal.

If the appliance does not work, before calling for Assistance (

see Assistance), check for a solution from the following list.

This manual is related to the following products: