InFocus IN20 - Manual (Page 30)

29
Presets : Presets are provided that optimize the projector for displaying
computer presentations, film images, and video images. Film input is mate-
rial originally captured on a film camera, like a movie; video input is mate-
rial originally captured on a video camera, like a TV show or sporting event.
There are also user-definable presets. To set a preset for the current source,
adjust the image, select Save Settings in the Presets menu, then select Save
User 1 (or 2 or 3). You can recall these settings in the future by selecting the
User 1 preset. If you select User Presets then further adjust the image, Pre-
sets Off will automatically be selected in the Preset menu to indicate
changes have been made.
To restore the factory default settings, choose Factory Reset in the Set-
tings>Service
menu (page 33).
Advanced menu
The following four (4) options are for progressive and computer sources.
Phase : adjusts the horizontal phase of a computer source.
Tracking : adjusts the vertical scan of a computer source.
Horizontal/Vertical Position : adjusts the position of a computer source.
Sync Threshold Adjust : (progressive signals only) If a hardware device,
such as a DVD player, is not syncing properly with the projector, select this
option to help it to sync when connected to the projector.
White Peaking : (video sources only) increases the brightness of whites that
are near 100%.
Overscan : removes noise around the video image.
Presets
Save
User
Settings
Advanced menu