beautypg.com

Starting up your washer – Indesit WG1030G User Manual

Page 6

background image

4

GB

Detergents and fabric softener

Open detergent dispenser B by pulling it outwards. Fill with
detergent and conditioner using the quantities indicated by
the manufacturer on the packet according to the load you
are washing, the water hardness and how soiled your laundry
is. As you become more familiar with your washer, you will
regulate the quantities according to your own personal
experience.

Compartment 1
Prewash cycle detergent
(powder)
Compartment 2
Wash cycle detergent
(powder or liquid)
Compartment 3
Fabric softner

Never fill compartment 3 above the grid.
Use compartment 2 for liquid detergent, filling the
compartment just before you start the washer. Remember
that liquid detergent is ideal for wash cycles with
temperatures up to 60°C and for the programmes with no
prewash cycle. Special containers are available for liquid and
powder detergents. Fill the container and place in the drum
with the laundry, following the instructions shown on the
detergent packet.
Do not use hand washing detergents since these produce
very heavy suds.
When using cold wash cycles, remember to reduce the
detergent dosage.

1

2

3

Starting up your washer

Run the first wash without laundry using programme
2 at 90°C.

Load your laundry in the washer, add the detergent and
fabric softener and remember to:
- shut the door properly
- plug the washer in at the mains
- turn on the water supply
- check that button C is not pressed in (position O)

Selecting the programme

The table on pages 5 will help you choose the right
programme. Turn dial A to the programme number you have
chosen and, if necessary, press functions buttons D, E; set
ON/OFF button C to position I (ON).

At the end of the wash cycle...

To turn off the washer press the ON-OFF button C and wait
approximately 3 minutes before opening the door. Once you
have removed your clean laundry from the washer, remember
to leave the door open or at least ajar (this will prevent the
formation of an unpleasant odour) and shut off the water
supply.

Anti-crease

This feature interrupts the wash cycle, letting the laundry
soak in the water before the spin cycle. It is activated only
during the wash cycles for synthetic materials and wool. This
feature is very useful because it prevents delicate and
synthetic clothing from wrinkling (for example, when you
are unable to remove the laundry at the end of the wash
cycle and it must remain in the machine for several hours).
The wash program can be completed with either a spin cycle
or by draining the water without wringing.
In the first case, simply turn the knob A clokwise one click.
In the second, turn the knob A to the drain setting, n°15.
In both cases, the knob A must be turned when the machine
is off.

This manual is related to the following products: