Removing and replacing the front bezel, Replacing the power supply, Removing – IBM THINKCENTRE 8123 User Manual
Page 16: Replacing, Front, Bezel, Power, Supply
Removing
and
replacing
the
front
bezel
1.
Remove
the
computer
cover.
See
2.
To
release
the
front
bezel
from
the
chassis,
press
downward
on
the
two
plastic
tabs
1
and
push
the
bezel
outward
as
shown.
3.
To
reinstall
the
bezel,
align
the
plastic
tabs
1
on
the
bottom
of
the
bezel
with
the
corresponding
holes
in
the
chassis,
then
snap
it
into
position
at
the
bottom
and
top
of
the
chassis.
4.
Go
to
Replacing
the
power
supply
Attention:
Do
not
remove
the
computer
cover
or
attempt
any
repair
before
reading
the
“Important
safety
information”
in
the
Quick
Reference
that
was
included
with
your
computer
or
in
the
Hardware
Maintenance
Manual
(HMM)
for
the
computer.
To
obtain
copies
of
the
Quick
Reference
or
HMM,
go
to
http://www.ibm.com/pc/support.
Note:
You
will
need
a
phillips
screwdriver.
1.
Remove
the
computer
cover.
See
Note:
For
this
procedure,
it
helps
to
lay
the
computer
on
its
side.
8
Hardware
Replacement
Guide