Connecting an analog (stereo) sound system, Turning on your tv for the first time, Understanding the basics – Insignia NS-46E560A11 User Manual
Page 17: Turning your tv on or off, Ee “connecting an analog (stereo) sound system
13
Insignia 40"/46" LED-LCD TV, 1080p
www.insigniaproducts.com
Connecting an analog (stereo) sound system
To connect an analog (stereo) sound system:
1 Make sure that your TV’s power cord is
unplugged and the sound system is turned off.
2 Connect an analog audio cable to L/R OUT jacks
on the side of your TV and to the L/R audio in
jack on the analog sound system.
Turning on your TV for the
first time
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through
setting up basic settings including the menu
language, TV signal source, and the channel list.
To set up your TV:
1 Make sure that you have:
• Installed the remote control batteries. (See
page 7 for details).
• Connected an antenna, cable TV, or satellite
TV. (See page 9 for details.)
• Connected the power cord. (See page 9 for
details.)
2 Press POWER on the remote control to turn on
your TV. The Choose your menu Language screen
opens.
3 Press or to highlight the language you
want, then press . The Choose your Picture
Mode screen opens.
4 Press
or
to
highlight
Home Mode or Retail
Mode, then press ENTER.
Home Mode reduces total power consumption.
If you selected Retail Mode, a message appears
“If you select Retail Mode, then Energy saving is
not realized.” Select Yes to continue, or select No
to change your selection.
The Choose your TV source screen opens.
5 Press
or
to
highlight
Antenna or Cable,
then press ENTER. Your TV automatically starts
scanning for channels available in your viewing
area.
Understanding the basics
Turning your TV on or off
To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press POWER to turn on your TV. The power
indicator LED blinks red, then turns off.
Back of TV
Analog sound system
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
EN TER
MENU
EXIT
Reduce total power consumpiton.
Move
Select
Previous
Exit
Please choose your picture mode
Retail Mode
Home
Mode