Led indicator – Icom iF22SR User Manual
Page 8
New master
3
1
PANEL DESCRIPTION
‘
‘ LED indicator
The TX/RX indicator LED indicates informa-
tion in several ways as follows;
(Ref.; R=Red, G=Green, O=Orange)
[Brink patterns]
R
R
R
R
R
R
R
R
R
R
R
R
G
R
O
O
G
G
• TX: Turns Red while transmitting a signal.
• RX (Busy): Turns Green while receiving a signal.
• Smart-Ring: Calling or answering back the Smart-Ring now.
• Fast/Slow scan: CH scanning or CTCSS FIND is functioning now.
• Low BATT1: You should charge the battery. (blinks slowly)
• Low BATT2: You must charge the battery. (blinks fast)
CAUTION:
• Low BATT3: If you did not charge the battery after Low BATT2
warning has appeared, the Low BATT3 warning beep emits for 15
sec. then the power turns OFF automatically.
• TX low BATT1: Low BATT1 was detected during TX mode.
• TX low BATT2: Low BATT2 was detected during TX mode.
IC-F22SR-(1) 02.3.23 2:29 PM Page 8 (1,1)