Installing batteries, Turning the power on and off – Insignia NS-DSC7P09 User Manual
Page 3
3
Installing batteries
1 Open the battery cover by sliding
it in the direction indicated by the
arrow.
2 Insert two AA batteries with
the positive (+) and negative (-)
terminals matching matching the
directions indicated inside the
battery compartment.
3 Close the battery cover.
Inserting the memory card
1 Open the battery cover.
2 Insert the card with the label facing
up and with the arrow pointing in.
3 Close the battery cover.
Note: To remove the card, gently press on the edge of
the card and release it. Pull the card out and close the
battery cover.
Turning the power on and off
1 Press
POWER to turn the camera
on in REC mode.
- OR -
Press PLAYBACK to turn the
camera on in PLAYBACK mode.
2 Press
POWER again to turn the
camera off .
This manual is related to the following products: