IOGear GCS932UB User Manual

Page 23

Step 8

If you have checked the “Check Firmware Version”

checkbox, then the utility will check the current

firmware that is on your KVM. If the current firmware

is newer than the firmware that you wish to upgrade

to, a window will popup and prompt you to ask if

you wish to proceed. Simply click “Yes” to start the

upgrade and “No” to cancel the upgrade.

Step 9
When the firmware upgrade is done, you will see

“Firmware upgrade OK” in the “Status Messages”

window. Then simply click “Finish” to complete the

whole firmware upgrade process.

Final Step

Now the KVM will reset by itself and it will be ready

for usage after the reset.

Note: If you did not check the “Check Firmware

Version” checkbox, utility will perform the upgrade

automatically no matter what version of firmware

you have in the KVM.