Insignia NS- DPF0712G - Manual (Page 12)

12
NS- DPF0712G
www.insigniaproducts.com
4 Extend the stand from the back of the frame, then place
the frame on a flat surface. Push or pull the stand to
adjust the viewing angle.
5 Slide the power switch to the ON position. The frame
automatically turns on and starts playing a slideshow of
the pictures stored in internal memory. This slideshow is
called Demo mode.
To turn off Demo mode, point the remote control at the
front of the frame and press
ENTER.
Tip
You can also disable and re-enable Demo mode
from the menu. For instructions, see “Setup
options” on page 25.