iHome iH27 - Manual (Page 4)

Controls and Indicators
iH27 Display
Snooze/Dimmer Button ³
DST Switch ¹
Alarm Reset/ ᕣ
Power Off Button
¸ Volume Down Button
¶ Time Set Button
Hour Set Button ¿
µ Volume Up Button
¾ SRS Button
ᕨ Alarm On-Off /Set Button
Sleep / Minute Set Button ´
² iPod Dock
2
iPod Play/Pause ᕢ
Power ON Button
Alarm Armed
PM Indicator
Clock Backup Battery Low Indicator
Time/Alarm Display
Sleep Display
iPod Indicator
SRS Indicator
Travel Lock Indicator
Main Battery Low Indicator
DST Indicator
AV out Jack ƹ ƺ Travel Lock Switch
ƻ DC Jack Line in Jack Ƹ
Back of Unit
9
Troubleshooting
Symptom Possible Problem Solution
iPod didn’t charge
iPod is not installed properly Remove your iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPod. Then replace it in the dock.
iPod is locked up/ frozen
iPod battery has problem
Operating iH27 on batteries. The iH27 only
charges iPod while operating on AC power
Please make sure your iPod is working properly before
docking into the unit. Please refer to your iPod manual for
details.
Sound is distorted Volume level is set too high Decrease the volume
Sound source is distorted If the iPod original sound source (MP3) is of poor quality,
distortion and noise are easily noticed with high-power
speakers. Try a different audio source such as a music CD.
If you are using an external sound source like older
generation of iPod, try reducing the output volume on the
device itself.
Remote Control
didn’t work
Batteries are weak Replace current batteries with new ones
Make sure the iH27 is plugged into a working AC outlet to
charge your iPod
Remote Control is not pointed toward
the iH27 remote sensor or sensor is
blocked Point the Remote Control toward the iH27, move within 10
feet of the unit, make sure sensor is unobstructed
Battery weak Replace current battery with new battery
Travel Lock is in Lock or Off position Move Travel Lock switch to Remote position
Try turning bass boost OFF on your iPod/sound source.