iHome IP18 - Manual (Page 9)

This unit has a Bedtime Sleep feature which gradually lowers the volume of playing audio over a set time then turns the unit
off. It will also turn off a docked iPhone or iPod.
1. Press and release the Sleep Button as needed to cycle to the desired sleep setting: 120, 90, 60, 30, 15 minutes or Off
(cancels sleep mode).
2. To set sleep volume, press the or Buttons. Sleep volume does not effect normal or alarm volume settings.
3. During sleep mode, press the Sleep Button to view the sleep time remaining. Press again to set sleep to the next lowest
setting.
4. To cancel sleep mode and turn the unit off, press and release the Button.
When unit is in normal mode (no alarm is sounding), press the Snooze/Dimmer Button to cycle through High, Medium, Low,
and Off brightness settings. Settings affect both the display and cabinet LED. Dimmer function will not work during GLOW
color change mode. When LED color mode is set to OFF, pressing the Snooze/Dimmer Button will place unit in 1 COLOR
mode with white backlight. Press the Color Button again to return color mode to OFF.
Color Change Mode
Color Change Mode can be accessed whether the unt is ON or OFF. There are 3 color settings. Press the Color Button
to cycle through them. The settings are:
• GLOW Slow color change (default): Colors slowly fade in and out continually from one color to the next.
• FAST Fast color change: colors change quickly from one to another through the color spectrum.
• 1 COLOR Select the last color. NOTE: To manually cycle to a desired color, press and release the
<< or >> Button as needed while the unit is OFF. This function is not available while the unit is ON.
• OFF Turns off cabinet color effect.
6
Dimmer Mode
Bedtime Sleep Mode
Page 9