Assembly – Image IMBE40890 User Manual

Page 6

Before beginning assembly, make sure that you
understand the information in the box above.
Note: Some of the parts described in the assem-
bly steps may be pre-assembled.

Press a 2Ó Square Inner Cap (17) into the indicated
end of the Right Stabilizer (26). Press a 2Ó Square
Outer Cap (58) onto the other end of the Stabilizer.

Press a 48mm Round Inner Cap (12) into each end of
the welded tube on the Right Stabilizer (26).

Press a 1.5Ó Square Inner Cap (72) into the storage
tube on the Right Upright (2).

Slide the Right Upright (2) onto the Right Stabilizer
(26) as shown. Attach the Upright to the Stabilizer
with an M10 x 65mm Bolt (67), two M10 Washers (6)
and an M10 Nylon Locknut (11). Do not tighten the
Nylon Locknut yet.

Set the upright assembly aside and make sure it
cannot fall over.

Before beginning assembly, carefully read the
following information and instructions:

¥ Assembly requires two people.

¥ Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing
materials until assembly is completed.

¥ Tighten all parts as you assemble them, unless

instructed to do otherwise.

¥ For help identifying the small parts, use the PART

IDENTIFICATION CHART on page 5.

¥ As you assemble the weight bench, make sure all

parts are oriented as shown in the drawings.

The following tools (not included) are required
for assembly:

¥ Two (2) adjustable wrenches

¥ One (1) rubber mallet

¥ One (1) standard screwdriver

¥ One (1) phillips screwdriver

¥ Lubricant, such as grease or petroleum jelly

plus soapy water.

Assembly will be more convenient if you have the
following tools: A socket set, a set of open-end or
closed-end wrenches or a set of ratchet wrenches.

Assembly

Make Things Easier for Yourself!
Everything in this manual is designed to ensure
that our products can be assembled successfully
by anyone. However, it is important to recognize
that this is a sophisticated product with many
small parts and, consequently, assembly will
take time. Most people find that by setting aside
plenty of time, and by deciding to make the task
enjoyable, assembly will go smoothly.