beautypg.com

43 2 1 warning – Image 10.8QL User Manual

Page 10

background image

HOW TO TURN ON THE POWER

Make sure that the on/off
switch, located on the
front of the treadmill, is in
the on position. Next,
make sure that the power
cord is properly plugged
in (see page 7).

Stand on the foot rails
of the treadmill. Find the
clip attached to the key
and slide the clip onto the
waistband of your
clothes. Next, insert the
key fully into the console.
After a moment, various displays and indicators will
light. Test the clip by carefully taking a few steps
backward until the key is pulled from the console.
If the key is not pulled from the console, adjust the
position of the clip as needed.
Then, re-insert the
key fully into the console.

HOW TO USE THE MANUAL MODE

Insert the key into the console.

See HOW TO TURN ON THE POWER at the left.

Select the manual mode.

When the key is in-
serted, the manual
mode will automati-
cally be selected and
the manual indicator
will light. If a program
has been selected, press the Program Select but-
ton repeatedly to select the manual mode again.

Put on the heart rate monitor if desired.

For the Pulse display to show your heart rate, the
heart rate monitor must be worn. To put on the
heart rate monitor, see HOW TO USE THE
HEART RATE MONITOR on page 6.

Press the Start button to start the walking belt.

When the Start button is pressed, the LED track in
the center of the console will disappear in a coun-
terclockwise direction. One flashing indicator will
then appear and the walking belt will begin to
move at 1.0 mph. Hold the handrails and begin
walking.

The LED track rep-
resents a distance
of 1/4 mile. As you
exercise, the indica-
tors around the
track will light one at
a time until the en-
tire track is lit. The
track will then disappear in a counterclockwise di-
rection and a new lap will begin.

To stop the walking belt, press the Stop button. All
displays will pause and the Time/Segment Time
display will begin to flash. To restart the walking
belt, press the Start button. To stop the walking
belt and reset the displays, press the Stop button,
remove the key, and then reinsert the key.

During the first few minutes that you use the tread-
mill, inspect the alignment of the walking belt, and
align the walking belt if necessary (see page 26).

4

3

2

1

WARNING:

To reduce the risk of

serious injury, read the following precautions
before operating the console.

• Do not stand on the walking belt when turn-

ing on the power or starting the walking belt.

• Always wear the clip (see part “N”on page 8)

securely on the waistband of your clothes
while using the treadmill. If the key is pulled
from the console, the walking belt will stop.

• The treadmill is capable of high speeds.

Adjust the speed in small increments.

• The heart rate monitor is not a medical device.

Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determin-
ing heart rate trends in general.

• If you have heart problems, or if you are over

60 years of age and have been inactive, do
not use the pulse programs. If you are taking
medication regularly, consult your physician
to find whether the medication will affect
your exercise heart rate.

• To reduce the risk of electric shock, keep

liquids away from the console and use only a
sealed water bottle.

On

Position

10