Image IMTL19905 User Manual

Page 17

Adjust the cushioning system as desired.

See step 6 on page 14.

Select a display mode and follow your
progress with the exercise information on the
screen.

See step 7 on page 14.

Measure your heart rate if desired.

See step 8 on page 15.

Turn on the fans if desired.

See step 9 on page 15.

When you are finished exercising, remove the
key from the console.

See step 10 on page 15.

HOW TO CREATE A CUSTOM PROGRAM

Insert the key into the console.

See HOW TO TURN ON THE POWER on page
13.

Identify yourself as user A, B, C, or D.

See step 2 on page 13.

Select one of the custom programs.

To select a custom program, press the Programs
button repeatedly until the words “My Design #1,”
“My Design #2,” “My Design #3,” or “My Design
#4” appear on the screen.

Note: If the custom program has not yet been
designed, a program time of three minutes will
appear on the screen. If the program time is
more than three minutes, see HOW TO USE A
CUSTOM PROGRAM on page 18.

Press the Start button or the Speed increase
button and program the desired speed and in-
cline settings.

A moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
begin walking.

Each custom program is divided into one-minute
segments. One speed setting and one incline set-
ting can be programmed for each segment. To
program a speed setting and an incline setting for
the first segment, simply adjust the speed and in-
cline of the treadmill as desired by pressing the
Speed and Incline buttons.

When the first segment of the program ends, a se-
ries of tones will sound and the current speed set-
ting and the current incline setting will be saved in
memory. Program a speed setting and an incline
setting for the second segment as described
above.

Continue programming speed and incline settings
for as many segments as desired; custom pro-
grams can have up to forty segments. When you
are finished with your workout, press the Stop but-
ton twice. The speed and incline settings that you
have programmed and the program time will then
be saved in memory.