InSinkErator Necessity F-C1100 - Manual

3-3/4"
10-5/16"
8-3/4"
9"
14-5/8"
NOTE: Max counter
thickness is 3".
Inlet Tube
1/4" Incoming
Water Supply
Minimum 4-3/8" required
from sink hole center
to backsplash
Specifications
The Next
Necessity
™
Model
F-C1100
Submittal Sheet
Job Specifications
Cold Only Faucet
Sample Specification
Printed in USA HWDXXX-08C-45-10
1-800-558-5700
www.insinkerator.com
Chilled water faucet shall be InSinkErator
Model F-C1100 Cold Only Faucet, with
Stay-On
™ hands free lever. Faucet shall
be used with InSinkErator Model CWT-00
Chilled Water Tank, with 1.0 gallons per
hour capacity.
Warranty:
5-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
Our finest line of water dispensers for use with our
Chilled Water Tank & Filtration System for filtered
cold drinking water.
Tank & filter sold separately (CWT-00 & SST-FLTR)
• Cold Only – Dispenses cold drinking water
for use with an InSinkErator Chilled Water
Tank (CWT-00)
• Graceful high-arching spout swivels for
greater convenience and stylish integrated
lever provides a dramatic look
• Stay-On ™ hands free cool water lever
• Durable all brass faucet construction
• 5-Year We Come To You ® In-Home
Service Warranty*
• For use with InSinkErator Chilled Water Tank
• Designed to work with InSinkErator F-201
Filtration System to reduce chlorine taste
and odor
• Available in Chrome and Satin Nickel
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
InSinkErator may make improvements and/or
changes in the specifications at any time, in its sole
discretion, without notice or obligation and further
reserves the right ot change or discontinue models.
© 2008 InSinkErator, a division of
Emerson Electric Co. All Rights Reserved.
Valve
Shipping Weight
Manual return
Required
Hole Diameter
Approximately
1 -1/4" – 1 -1/2"
standard sink hole
4.0 lbs.
Dimensions
5-1/2"
5-1/2"
8-3/8"