Iluv i7500 - Manual (Page 10)

iLuv
TM
Mini Audio System V10M10_IM_EN_01302006
- 9 - www.i-Luv.com
GENERAL OPERATIONS
NOTE: Before setting the timer, make sure the clock is correctly set.
SETTING THE SOUND SOURCE
Select TUNER or CD mode and select the desired sound source.
SEETING THE TIMER FOR TUNER
1. If you select BAND, press REW/DOWN or FF/UP to select a preset station.
2. The display will show the selected preset station and frequency.
3. Press
TIMER to confirm your selection.
a. “H” icon and “ON” will appear on the display.
b. The hour digit segment will flash more than 2 seconds.
4. Press (REW/DOWN) or (FF/UP) to set the hour.
5. Press TIMER again, and the Minutes Digit segment will flash on the display.
6. Press (REW/DOWN) or (FF/UP) to set the minutes.
7. Press TIMER again to store the start time.
8. Repeat steps 6~8 to set the timer off.
a. The display will show the TUNER segment.
9. Press TIMER to store the sound source.
a. The volume level 15 will appear on the display.
10. Press (REW/DOWN) or (FF/UP) to set the desired sound level.
11. Press TIMER again to store the timer setting.
SETTING THE TIME FOR THE CD
1. Insert a disc into the CD tray.
2. Press
TIMER.
3. Repeat steps 4-11 under ‘Setting the Timer for Tuner’
4. Press
(REW/DOWN) or (FF/UP) to set the sound source to CD.
a. The volume level 15 will appear on the display.
5. Press (REW/DOWN) or (FF/UP) to set the desired sound level.
6. Press TIMER again to store the timer setting. CD will be played.
SETTING THE TIMER OFF
Press the TIMER. The “H” icon will disappear.
SETTING THE SLEEP FUNCTION
1. Press SLEEP, and “SLEEP” will appear on the display.
2. Keep pressing SLEEP to adjust the sleep time in the order of 90>80>70...10 minutes.
3. To cancel the Sleep mode, press SLEEP again.
SETTING THE PRESET EQUALIZER
Press PRESET EQ to select the digital sound performance in the order of PASS, CLASSIC, ROCK, POP,
JAZZ and PASS.
MUTING THE SOUND
Press MUTE to terminate the sound output. Press again to cancel this mode.
OPERATIONS (CLOCK & RADIO)
SETTINGS
1. Under the power standby mode, press and hold MEMORY on the main unit for 2 seconds to access
clock setting. The first second digit of the 24-hour clock will flash.
2. Press (REW/DOWN) or (FF/UP) on the remote control to set the correct hours.
3. Press MEMORY to select the minutes setting, and the "00" will flash.
4. Press (REW/DOWN) or (FF/UP) to set the correct minutes.
5. Press MEMORY once more to store and confirm in the memory.
TUNING RADIO FREQUENCY
1. Press
POWER on the remote control to switch on the unit or remote.
2. Press FUNCTION on the remote control to select the tuner mode.
3. Select the radio band (AM/FM) by pressing BAND on the remote control.
4. Press
(REW/DOWN) or (FF/UP) for few seconds, and then release the button.